Highly Active Granular Nickel Powders for Multi-Batch Production of Spongy Oxide Cathodes

Powder Metallurgy and Metal Ceramics - A process was developed for the production of agglomerated carbonyl nickel powders with spherical particles ranging from 45 to 71 μm. The powders are...     

Nanocomposite powders of hydroxyapatite-graphene oxide for biological applications

The repair of bone fractures is a clinical challenge for patients with impaired healing, such as osteoporosis. Currently, different strategies have been developed to design new biomaterials, enhancing their interactions with biological systems and conducting the cellular behavior in the desired direction to help fracture healing. In the present work, hydroxyapatite-graphene oxide (HA-GO) nanocomposites were produced and the morphological and physicochemical influences of the addition of 0.5 wt%, 1.0 wt% and 1.5 wt% of GO to HA were observed. FEG-SEM and TEM analyses of HA-GO nanocomposites showed HA nanoparticles adhered to the surface of the GO sheets, suggesting an effective method to form nanostructured graphene-based biomaterials. As confirmation, physicochemical analyses by Raman, FTIR and TGA demonstrated a strong affinity between HA and GO, according to the increase of concentration from 0.5 wt% to 1.5 wt% GO in the HA-GO nanocomposites. Also, in order to evaluate the HA-GO nanocomposites behavior under biological microenvironment, in vitro bioactivity and indirect cytotoxicity tests were performed. FEG-SEM analyses confirmed the positive results for the bioactivity properties of HA-GO nanocomposite and indirect cytotoxicity demonstrated that even with a decrease in the hDPSCs viability and proliferation, when increasing to 1.5 wt% of GO concentration, high level of cell viability was exhibited by HA-GO nanocomposites. These biological results suggested the 0.5 wt% HA-GO nanocomposite as a potential bioactive bone graft and a promising biomaterial for bone tissue regeneration, when compared to the pure HA.     

Impact of the Zr-substitution on phase composition,structure, magnetic,and microwave properties of the BaM hexaferrite

Rapid developments in information technologies and a large rise in electrical and electronic equipment have generated different forms of electronic environmental contamination. Microwave absorption materials are important to avoid the damage that can be caused by electromagnetic radiation. A necessary condition for the absorption of the most incoming radiation is balanced wave impedance at the air/shield interface, which depends on the studied materials' magnetic and electrical properties. The paper introduces the preparation of BaFe_12-xZr_xO₁₉ (x = 0.1, 0.3, 0.6, 0.9, and 1.2) using a solid-state reaction technique. The studied samples were examined by X-ray diffraction, scanning electron microscopy, vibrating sample magnetometer, and a vector network analyzer. The studied samples showed that controlling the grain size and the prepared samples' magnetic properties play an important role in enhancing the microwave radiation absorption. The examined samples can be a promising absorption material in electromagnetic shielding applications.     

The Influence of the Sequence of Application of Modifying Components on the Protective Properties of a Chemical Ammonia Absorber

Protection of Metals and Physical Chemistry of Surfaces - In this work, a universal sorbent has been obtained that works according to the mechanisms of chemisorption and adsorption by impregnating...     

Matrix Manipulation of Directly-Synthesized PbS Quantum Dot Inks Enabled by Coordination Engineering

The direct-synthesis of conductive PbS quantum dot (QD) ink is facile, scalable, and low-cost, boosting the future commercialization of optoelectronics based on colloidal QDs. However, manipulating the QD matrix structures still is a challenge, which limits the corresponding QD solar cell performance. Here, for the first time a coordination-engineering strategy to finely adjust the matrix thickness around the QDs is presented, in which halogen salts are introduced into the reaction to convert the excessive insulating lead iodide into soluble iodoplumbate species. As a result, the obtained QD film exhibits shrunk insulating shells, leading to higher charge carrier transport and superior surface passivation compared to the control devices. A significantly improved power-conversion efficiency from 10.52% to 12.12% can be achieved after the matrix engineering. Therefore, the work shows high significance in promoting the practical application of directly synthesized PbS QD inks in large-area low-cost optoelectronic devices.     

一种改进的特征匹配算法在碎片云测量建模中的应用

为满足超高速撞击典型Whipple防护构型的损伤评估需求,利用图像处理技术对碎片云序列阴影图像进行深入研究。使用超高速序列激光阴影成像仪得到三组不同实验条件下碎片云发展过程的高清阴影图像,分别对每组最具代表性的2帧进行图像处理分析;根据碎片云图像特点以及碎片运动特性,提出了一种改进的碎片二次特征匹配算法,该方法包含碎片粗定位、特征定义及初匹配和精确匹配三步策略;通过运用改进的匹配算法,对选取的相邻两帧图片完成碎片高效匹配,并提取匹配碎片的运动参数,进而分析碎片的速度分布和飞行角度分布,获取二次碎片云相关运动特性;得到三组实验各自的轨迹模拟图。根据得到的轨迹分析结果分别对三组实验的后板损伤进行估计,并通过与防护构型的实际损伤结果进行比较,验证了该方法的有效性。     

Structural,electronic paramagnetic resonance and magnetic properties of praseodymium-doped rare earth CeO2 semiconductors

In this work, praseodymium (Pr) doped cerium oxide (CeO₂) was prepared using the microwave-assisted hydrothermal method (MAH) and the properties were investigated by X-ray diffraction analysis (XRD), Raman spectroscopy, Field Emission Gun Scanning Electron Microscope (FEG-SEM), BET method, Photoluminescence spectroscopy (PL), Fourier-transform infrared spectroscopy (FTIR), Ultraviolet–visible spectroscopy (UV–Vis), Electron paramagnetic resonance spectroscopy (EPR) and Magnetometry. The results showed that increasing the Pr-doping promotes a structural disorder due to increased oxygen vacancies. XRD confirmed a cubic structure without deleterious phases with modifications in the structure caused by alteration in the cerium oxidation state as well as changes in the crystallite size and strain obtained by Wellinson-Hall method. Raman spectroscopy shows that changing the Pr content results in samples with different defect densities at short range. FEG-SEM showed that the nanocrystals are agglomerated with small particles tend to aggregate spontaneously to decrease the surface energy. BET method showed that the Pr doping results in a gain of specific surface area. PL indicated that Pr³⁺ leads to distinct emissions; red emission associated to oxygen vacancies located near the conduction band (shallow defects), green emission associated to electron-hole recombination and orange emission associated to shallow defects and electron-hole recombination. FTIR indicated the complete process of nucleation with no other phase. UV–Vis showed the transitions between oxygen 2p, cerium 4f and praseodymium 4f states. The EPR signal shows events occurring around 344 mT. These events can be related due the presence of paramagnetic elements containing unpaired electrons, such as Ce (III), which is indicative of cerium reduction caused by Pr ions, as evidenced by Rietveld data. Regardless of the Pr concentration used in this research, the magnetic measurements show a superparamagnetic system below the blocking temperature of ~20 K and a paramagnetic system above this temperature, which indicates no significant changes in the average size of the nanoparticles. Surface area, crystallite size and the temperature are important parameters, which control the magnetic properties of such N-type semiconductors.     

Description of the Operation of a Biochemical Reactor by a Diffusion Model

Theoretical Foundations of Chemical Engineering - The operation of an unsteady-state well-stirred flow-through biochemical reactor is studied. Nonlinear boundary-value problems describing the...     

Infrared Spectroscopy Study of Composite Materials Based on Nanoporous High-Silica Glasses Activated with Silver and Lanthanum Ions

Glass Physics and Chemistry - Composite materials (CMs) activated by silver and lanthanum ions based on high-silica porous glass (PG) matrices have been synthesized. The CMs were studied by IR...     

Optimization of Steam Reforming of Methane in a Hydrogen-Filtering Membrane Module with a Nickel Catalyst and a Palladium-Alloy Foil

Theoretical Foundations of Chemical Engineering - A model is proposed for steam reforming of methane in a catalytic reactor, the working section of which includes two cylindrical chambers separated...